Car Care Tips: Vacuuming and Cleaning Your Interior

As we all know cars are a huge investment and most of us want to do as much as we can to protect that investment. Some of the simple steps to protecting your investment and extending the life of your car are checking and topping off all fluids; changing the oil of your car on a regular basis and taking your car to a well-respected mechanic for scheduled maintenance. But you already know that. What most people do not realize is that keeping the interior of your car clean is also a very important task if you want to maintain the value of your vehicle. It is understood that in our busy lives some of us just do not have time to detail their cars nor do they have the funds to pay for professional detailing. There are though a few simple jobs anyone could perform that would take anywhere from 5 minutes to half an hour depending on how dirty your car is and how clean you want it to be. If you’ve been neglecting your car, take a look at our range of car cleaning products to give it back its sparkle.

Vacuuming

Vacuuming your interior and carpets will keep your car in pristine condition as well as keep you and your family in good health. Over time particles build up leaving your carpets filthy and air vents full of allergens that spread around the cabin. Vacuuming your car on a regular basis will help prevent the buildup of dirt and grime which over time can work their way inside buttons and switches causing them to fail. You can get the job done very quickly by following these easy steps:

It is best to buy a Shop Vac or something similar on wheels so that you can move around quickly. These are relatively inexpensive.
Start off by using the crevice nozzle for the floors and carpets. Remove the front floor mats and start vacuuming the carpets.
Move you seats as far back as you can so you get as much room as possible.
Make sure you get up under the seats, in the cracks and in between the seats.
When you are finished with the front move your seat as far up as you can and remove the rear floor mats. Repeat the above steps for the back seats.
For seats use the brush nozzle. This will allow you to get to the cracks and crevices on the seats without damaging the interior.

Cleaning the Interior

Now that you have vacuumed your car it is time to clean the interior. Why is this important? As mentioned before over time dirt and grime will wear on your material causing cracks and tears. Taking a few minutes to wipe down your interior will help prevent these problems. Start off with a clean towel:

Soak your clean towel in water. Then wring it out until it is damp, initially you do not need to use any cleaners.
Wipe down the door panels, the dashboard and seats. Using the damp towel without cleaners will not damage your interior.
Make sure you get the shift nobs, the steering wheel everything you can wipe. You will get up 99% of the dust and dirt simply with this damp towel.
After you are finished you can go back and add some cleaner to get some of those tough spots. Make sure that the cleaners you use will not damage your interior. Some cleaners will damage your interior causing it to crack and tear.

Know more to follow these simple steps and you are well on your way. Of course there is much more you could do, it all depends on how much time you have and how clean you want your car to be. The next step would be to detail your interior, using certain detergents and cleaners. Cleaning your interior is not the only important task to keeping your car clean. Once you are finished cleaning and detailing your car’s interior it is ready to be washed. It make take some patience to get your car just the way you like it, some people take hours on their cars, start off by following these simple steps to keep your interior and carpets clean and as time permits you can do bigger jobs such as waxing and shining. Just make sure that you do give attention to your car’s interior so you can keeping it looking great for years to come while maintaining your automobile’s value.

Raymond Perez writes about Car Maintenance at Car Care Coach.

Article Source: http://EzineArticles.com/expert/Raymond_S_Perez/1235408

Article Source: http://EzineArticles.com/6779293

Some Things to Remember When Painting a Car Interior: Doors

When deciding on how to apply paint to a car interior please consider the paint protection Brisbane company, there are a variety of factors to keep in mind. This can be one of the most difficult areas of a car to paint when undertaking a full body paint job. Luckily, our modern era has given us special touch up tools and accessories that can easily be obtained when you are ready to go about painting a car interior.

Let’s use the example of a car door. When painting a car interior, the doors will be one of the main aspects of the project. It would be a good idea if these were removed from the car itself. It is also a good idea to remove the windows and mask the areas where you do not want paint to accidentally get on.

Remember to use the same type of paint for the inside of the door as you used for its exterior and the rest of the vehicle. Though once in a while it works, do not mix single stage and base coat/clear coat. It will be quite noticeable.

One must also take heed to make sure the interior of the door is clean before applying any paint. Sand and dust will have accumulated if you have had to use a sander. A good air blaster can clean this debris out. After cleaning this material, you can apply the masking.

Door handles, locks, and any other accessories you do not want to be painted will require masking. Take great care in this process as a shoddy job will lead to over spray of areas you do not want painted. This will be an easily visible sign that the car has been repainted when you sell it.

The door jambs are also an important element to remember when DIY auto painting. Over spray getting into these areas can be extremely hard to clean up, so it is wise to pay close attention when masking these areas. Know more that the best way to mask the door jamb is to open the door of the vehicle and then affix tape along the inner edge of the door.

Next, attach masking paper to this piece of tape and fold it over to the inside the door. It is a common practice to coat these areas before the rest of the vehicle so there is no need to worry about over spray. I know it may be tedious, but being careful painting this area will make a huge difference in your paint job.