Bird Droppings On Car Paint

As a professional car paint protection company in Sydney, I have been involved in a myriad of detailing duties from general detailing to paint correction using various car polishing techniques, interior detailing and God knows what else, let me tell you I have seen it all. The worst thing I hate seeing on paint is egg or even worse bird droppings. In cases like this, most car owners don’t remove the bird stains and leave it on the car for days on end. Even eggs. Most people don’t know it but clear coats on paint are very thin and especially since 2008.

In many cases, when bird droppings or egg is left on the car, it is often too late to restore the finish using buffing techniques using compounds or polishes within the auto detailing industry for the simple reason that the acid in the bird dropping has penetrated the car’s paint. There are many varied elements of damage that can occur to car paint while your car is facing the sun on a daily basis and you could get away with a lot of different types of fallout sitting on your paint but, anything acidic like bird crap or eggs will eat through your paint in no time flat.

It should also be noted that on hot days, bird droppings act even faster to eat through car paint. It needs to be understood that for the sake of removing a bird turd which takes a minute to do, most car owners leave it sitting on there for weeks and when they try to remove it, they find that there is a patch left behind in the paint and say to themselves ” oh dear what is that ? ” I’ll tell you what it is.

It’s the cost of a newly re sprayed panel that your going to need because you allowed to sit on your pain twork for days on end. With the average re spray on a given panel costing anywhere from 300 dollars to 1000 dollars , it really is worth a simple moisten up and wipe off to restore your paint instead of burning a 1000 dollar hole in your hip pocket.

For cases where bird turds have been sitting on your paint, before removing it, moisten it up first. Do not try to scrape it off. You may even try using your garden hose and blast it off and this will eventually remove a large portion off your car paint. Upon having done this, grab yourself a microfiber cloth with some detailer or car polish and then wipe off the remainder of the stain. If it doesn’t come off with normal polish or you have a stain left behind you will need some form of paint correction to restore it. If it does restore to its former state then be sure to also apply car wax to protect the car’s paint from any further fallout or the elements of nature.

Keeping your vehicle looking new with a quality car paint protection Adelaide film from a company you can trust is important. If you have bought a new car or applied a new car paint color to change the look of your vehicle, the last thing you want is to create a situation that could cause the paint to fade. Understanding the common causes of car paint fading can help you to avoid them.

1. Sunlight

Even when the sun doesn’t appear to be that bright, the ultraviolet rays can still remain powerful and can cause the car paint color to fade. The sun’s rays degrade the finish of the paintwork which is designed to protect it. This then leaves the paint exposed and susceptible to damage and fading to the color. With the sun comes the heat, which is absorbed and stored in the metal of the car’s bodywork and can also be the cause of fading and discoloration. If you find the problem mainly affects the roof, hood, and boot then this is likely to be the cause. Wherever possible, avoid parking the car in direct sunlight and store the car within an enclosed garage or covered port if you have the facility.

2. Salt

If you live near the ocean, you may find that salt in the air can be problematic and can cause your car paint color to fade. If salt is allowed to remain on the surface of the paintwork, you will find that the result will be oxidization. This can not only cause the paint to fade, but will also damage it to the point where it peels and rusts the surface beneath. This problem can be prevented with the use of a regular and effective method of cleaning and waxing to create a surface that salt cannot stick to.

3. Abrasive Cleaners

Using the wrong solutions and tools to clean the car can result in the car paint color fading if they are used over extended periods of time. Not every type of cloth is suitable for cleaning a car’s paintwork even if it is heavily soiled. Do not, under any circumstances, use a scouring style pad or cloth to clean the car as this can result in you removing layers of paint. In addition, always make sure that you use a cleaning solution that is specifically manufactured for the purpose of cleaning cars. Avoid any products that contain an array of chemicals. Maintain the wax job to the car’s paint job to reduce the need for cleaning. A decent wax will prevent debris adhering to the car so that you do not have to undertake any unnecessary cleaning.

4. Pollution

There are a range of contaminants and toxic particles that are floating around the atmosphere, which are all the more dangerous and destructive because they are not immediately evident. If you find that your paintwork has faded but there does not immediately appear to be a cause, this may be the problem. Consider your surroundings and the areas in which it is usually stored, if there is a significant amount of traffic or factories close by, as this can be the cause of the problem.

If rust is showing up on the body of your vehicle even though you have been applied by car paint protection Sydney, you may want to engage in some simple rust removal and color blending in order to maintain the vehicle’s appearance. There are ways to do the job yourself, although it will take several steps and a couple of days to accomplish. If you have a free weekend coming up, you can remove rust from a car by taping off the rusty area, gently sanding off the rust, cleaning the area thoroughly, and then repainting it.

Rusting normally occurs because the car’s finish has been damaged in some manner. The rust spot increases as oxidation on the exposed bare metal in a hairline scratch or a small dent causes the rust to spread.

The first step to remove rust from a car is to gather your tools together. You will need rubber gloves, safety glasses and a dust mask for protection. To protect the surrounding areas of the vehicle, a cheap paint tarp and some painters tape will also be necessary. A sanding wheel along with a few sheets of sandpaper will also come in handy. You’ll need to have a small amount of rust acid compound on hand as well.

Begin by covering and taping off the area surrounding the scratch or dent. The idea is to protect the immediate surface that is still in good shape. The painter’s tape is not likely to hurt the finish of your car, and will stay in place for the duration of the process. Roll up the windows on the vehicle too, because when you begin to sand the rusted area, tiny particles will fly in every direction. Make sure none of the fine rust particles have a chance to settle and begin to imbed themselves in other areas of the car body or you will find yourself having to repeat the removal process.

Your first task is to address the thicker outer layer of oxidized rust using the sanding wheel. Do not rush with this step, as moving too quickly makes it easier to damage the metal. Once the tougher outer layer of rust is removed, switch to the sandpaper sheets to get into the fine nooks and crannies. This will help ensure you get all the rust off of the car during this procedure, including any small amount or residue that may have resettled when you used the sander.

When the sanded surface feels smooth, gently wipe it clean and apply a thin coat of the acid to the area. This step will take handle even the tiniest of particles and leave the exposed metal perfectly clean. Make sure to not leave the compound on the exposed metal longer than recommended in the instructions. Failure to remove the acid could lead to pitting and even more work. After removing the compound, gently wipe the area with mineral spirits and a clean cloth, and allow the section to dry.

Keep in mind that removing rust from a car should only be done when you can reprime and repaint the sanded area within the next 24-hour period. If you choose to leave the bare metal exposed for even a short time, rust can start to develop again and the damage will be worse than the initial problem.