Not everyone is experienced with vehicle care. You may not be an enthusiast or even a mechanic, but learning some basics to maintain the vehicle you own can go a long way in taking care of it. You may not want to handle everything that has to do with the mechanical aspects it, but for the overall life of your vehicle, keeping it clean all over is important. Part of that upkeep is getting down and remove grime underneath. A clean under-body can up its driving performance and improve its lifespan. You might want the experts to take control of this job; however if you ‘d prefer to take care of it yourself, here’s what you need to know to do it right. It doesn’t matter what time of year it is, cars have a terrible habit of getting dirty and that’s why you need best car polish.

Step One: Gathering Your Tools. You might think you just need a bit of water, a sponge, some soap and you’re done. This is not the case. You’ll need a degreaser and something to dislodge any debris within the under-body. Helpful items include a garden hose, protective mittens or gloves, oil, soap, a screwdriver, a stiff brush, and tweezers.

Step Two: Put on the Emergency Brake. You need to be able to fit under the vehicle to see the under-body. This means loosening lug nuts, putting the car up using a jack, and then adding the jack stands. Remove all of the lug nuts and the tires from the back end of the vehicle once it is up.

Step Three: Spray and Wash. Spray the rear section of the undercarriage well to remove any loose chunks. Apply soapy water all over, using a large sponge or cleaning mitt. Let the soap sit on the under-body for 15 minutes. Then scrub away the debris with the brushes, use the tweezers to remove the hard debris, and apply your degreaser to the greasy parts of the under body.

Step Four: Rinse and Dry. Spray down the chassis and under body with water. Once it is rinsed off and the dirt is removed, you can dry it with a soft microfiber cloth. Ensure that you dry the painted areas completely so the water does not rust these surfaces.

Step Five: Oil to Protect – Use the 3-in-1 Oil Add the oil to the axles and bearings in the shaft. Wipe off any extra. You can then begin to put the vehicle back together and bring it down off the jack stands. Ensure that the lug nuts are tightened completely on the wheels.